Maintenance – My Most Valuable Advice

This is How to Maintain Your Floor

Cleanliness will always be desirable. Keeping the floor looking nice and clean can be a little challenging especially when you don’t have a clue how to approach the process. The cleaning process involves some degree of preparation;the right cleaning products have to be bought and arrangements have to be made to have on site good cleaning equipment. Just about anyone can mop clean a floor,some times,but there are some other processes that are performed on floors such as stripping that require a certain level of expertise.If you have the skills and know all the right cleaning supplies that are needed to get a floor as clean as possible,you can do it yourself. For those people without the time or the experience to handle the processes,there are trustworthy floor maintenance technicians who will be more than happy to solve this problem in Lubbock. In this article,you will learn a few things about each of the three processes.

For the most part,all you have to do to keep the floor clean is sweeping and mopping. Remove spilled liquids and foods immediately the accident happens. Use vacuum cleaners in places with a lot of dirt and mess.

Floor mats in places where traffic is heavy helps to preserve your floor. If there are stains on your floor,you need to remove them;your ordinary nail polish could do wonders here. Sensitive floor surfaces may require you to use microfiber mops which will not damage the floor. Floor scrubbers are suitable for commercial and industrial use. Choose the right cleaning solution.

Stripping follows after cleaning. This process removes deep scratches or dirt that has become embedded onto the surface. You need to have the appropriate protective clothing and the place where you will be doing the stripping should be well ventilated;be careful and only use the most suitable chemical for your floor. You can use a mop to apply the chemical evenly all over the surface,avoiding excess in certain areas. The purpose of stripping is to remove all the wax from the floor so that the surface can take up a new coat. Use either a squeegee or a wet-dry vacuum machine to suck away the wax and the stripping solution. Clean your floor using a mop and water and allow it to dry.

After stripping,the floor needs some waxing. You will typically need to apply 2-5 layers of wax on your floor;repeat the process only when the previous layer has dried up. Buffing is finally done to give the floor a clean,fresh,shiny gloss that makes it look fabulous.

If you really don’t feel like committing to all this,why not call a reliable Lubbock floor maintenance specialist?

News For This Month: Waxing

Why Floors Aren’t As Bad As You Think